Xhorse VVDI Key Tool Max PRO Clone Universal Remote Key

 Hello, I'm here to show how to quickly clone an aftermarket remote with Xhorse VVDI Key Tool Max PRO programmer. This is the new key to be cloned, it's a Wired Remote comes from Xhorse.

Preparation

As it's a wired remote, you have to open key shell and take out the circuit board. I usually use a lighter to do it.

Take out circuit board, don't put any battery on it.

Connect the Universal Remote Key board to VVDI Key Tool Max PRO via cable.

Now, let's start!

Clone Remote

Hold the working key. Go to

Remote clone >> Special clone >> Start clone

Just follow the prompts to operate:

Press Lock button.

Press again Lock button.

Press Unlock button.

Press again Unlock button.

Press Trunk button.

Press again Trunk button.

Press Panic button.

Press again Panic button.

*If verification failed, just try re-acquisition again.

*If the button is not required, press "Skip this button".

Confirm the frequency: 433.92MHz, 184bps.

Press "Clone".

Writing data…

Burn success.

Unplug the universal key board to install a battery.

Test the remote to check if it works.

Perfect! All buttons can work.

Put the board back to key shell, that's it.

www.xhorsestore.co.uk