Xhorse VVDI Key Tool Plus CAS3+ AKL programming for 2007 BMW 328i
Xhorse VVDI Key Tool Plus Pad is supported to program 2007 BMW 328i CAS3+ all keys lost via OBD successfully. The procedure includes read & save key data, prepare dealer key. Check the steps below to learn how it works.
Read & Save Key Data
Plug VVDI Key Tool Plus connector into OBD2 interface, click
IMMO programming >> BMW >> Automatically diagnose models >> Start programming
The current system type is detected as CAS3/CAS3+...
Press “Read key information”.
All keys lost: insert a blank key into ignition switch and connect the vehicle and device. Click “No”.
Click “Yes” to continue reading
The dealer key should be taken away from ignition switch.
If key is keyless, please move it out of car.
If there’s no key in ignition, continue anyway.
Reading key info success.
Save key data file.
Prepare Dealer Key
Prepare dealer key with programmer >> Select a blank key position
Put new key into VVDI Key Tool Plus Programmer.
Is the current key a smart key? Yes
Warning:
Keyless key add to this position will don’t have smart function. You’d better choose other blank position.
Click “Yes” to continue.
Warning:
- 1 car can have 2 keyless keys at most.
- You should disable or clear the lost keyless key before add new keyless key.
- Make sure no keyless key or only 1 keyless key in CAS system before add new keyless key.
- Keyless key can’t be unlock after successfully make.
Click “Yes” to continue.
Key make okay and locked. Please use it start the car.
If can not start engine, use “Add Key” to CAS system.
If key can start engine, but keyless not working, use “Repair Keyless Key” function.
Test the key, it does work.
Done!
Comments
Post a Comment