Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

How to use Xhorse Key Reader & Dolphin XP-005 Key Cutting Machine to duplicate a Infiniti DA34 key? Following I’ll quickly demonstrate the procedure.

Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

 

Connect to Dolphin XP-005 machine in Xhorse App,

My favorite >> DA34 >> Optical identification

 

Push the Xhorse Key Reader button to insert a working key.

Press “Identification”.

Decoding successfully, bitting codes: 1212313443.

And it’ll display a picture with bitting codes to check.

Just make sure the dots looks like they’re in the right spots.

Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

Having installed the key blank on M1 clamp in advance.

Now we can go ahead to cut key directly.

Cutting key >> Cut

Dolphin XP-005 will start cutting after receiving command...

 

Remove the key when cutting was completed.

Walk over the car to test it out.

It can perfectly work.

Done!

Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

Xhorse Key Reader quickly identifies and cuts the Infiniti DA34 Key

BTW, purchase Dolphin XP-005 + Key Reader Bundle now can get more discount. This should be a good investment for locksmiths.

www.xhorsestore.co.uk

Comments

Post a Comment

Popular posts from this blog

Xhorse VVDI PROG with DB15 cable read Porsche BCM 2M25J

Image
 I finally got the new XDPGSOGL DB15 Cable to realize working with VVDI PROG & Xhorse Porsche Adapter . This is the first time to test reading the Porsche BCM 2M25J and give a review. Since I have already opened the BCM and insert a solder-free adapter on it. Very convenient without any soldering. Only to refer to the connection diagram in VVDI PROG . Be careful with those points marked in red. Test Backup Review Start VVDI PROG software to select options at first: Type: 4 IMMOBILIZER, Brand: Porsche, Chip: BCM-2M25J-BACKUP(ADAPTER) Click "Read", it reads correctly. Then save the D-Flash file. It's always safe to make a backup. Backup D-Flash OK. Now let's read P-Flash… Reading success. It takes longer time to finish. Save the P-Flash file. Backup P-Flash OK. Unlock & Lock BCM Review Select chip to: BCM-2M25J-R/W/UL(ADAPTER) Read ID OK . C482 is the Porsche processor that I have. Read Partition, it says "Chip is crypt. This ...
Read more

Xhorse VVDI Key Tool Plus AKL programming for Audi A4 2013

Image
  Xhorse VVDI Key Tool Plus Pad can program Audi A4 2013 all keys lost by OBD successfully. Xhorse also developed Audi BCM2 Solder-free Adapter for programming 2013-2019 A4L, A5, Q5, A6L, A7, A8 on bench.   It'll need to select "Prog read - encrypted BCM2" instead of "Read by OBDII" on tablet. As I don't have those Audi BCM2 adapters, I'll go on using OBD method. It may help: How Audi BCM2 Solder-Free Adapter Works with Xhorse Key Tool Plus? http://blog.xhorsestore.co.uk/xhorse-adapters-and-parts/how-audi-bcm2-solder-free-adapter-works-with-xhorse-key-tool-plus/   Procedure Connect VVDI Key Tool Plus into OBD2. The steps including read & save BCM data, make dealer key & key learn.   Read & Save BCM Data Immo programming >> Europe >> Audi >> Select by type >> Fifth immobilizer system >> Start programming >> Read BCM data >> Read by OBDII >> Read BCM2 data (OBDII)   Ins...
Read more

Xhorse VVDI Key Tool Max PRO Clone Universal Remote Key

Image
 Hello, I'm here to show how to quickly clone an aftermarket remote with Xhorse VVDI Key Tool Max PRO programmer . This is the new key to be cloned, it's a Wired Remote comes from Xhorse. Preparation As it's a wired remote, you have to open key shell and take out the circuit board. I usually use a lighter to do it. Take out circuit board, don't put any battery on it. Connect the Universal Remote Key board to VVDI Key Tool Max PRO via cable. Now, let's start! Clone Remote Hold the working key. Go to Remote clone >> Special clone >> Start clone Just follow the prompts to operate: Press Lock button. Press again Lock button. Press Unlock button. Press again Unlock button. Press Trunk button. Press again Trunk button. Press Panic button. Press again Panic button. *If verification failed, just try re-acquisition again. *If the button is not required, press "Skip this button". Confirm the frequency: 433.92MHz, 184bps. ...
Read more