Xhorse Condor XC-Mini Plus II vs. Condor XC-Mini Plus Comparison

 Xhorse has developed a new generation of Condor series cutting machine: Xhorse Condor XC-Mini Plus II. It is an upgraded version of Condor XC-Mini Plus. This article will analyze Xhorse Condor XC-Mini Plus II to see what features have been upgraded in this cutting machine.

 

Similarities

  • Same functions: self-calibration, all key lost, key duplication and cut by bitting.
  • Same powerful database.
  • Same APP enhanced functions: take photo to recognize, key 3D preview, customize key data.
  • Same range of cutting key types(standard + optional clamp).
  • Both can work with Xhorse Key Reader to recognize key bitting.

 

Upgrade Features

  • 2-in-1 M5 Clamp

Condor XC-MiniII is standard equipped with M5 clamp which is the combination of M1 & M2 clamp. No more need to disassembly or install clamp time and again. More convenient and easy.

 

Besides, standard equip is including M3 clamp this time. Optional for M4 clamp.

Xhorse Condor XC-Mini Plus II vs. Condor XC-Mini Plus Comparison

Xhorse Condor XC-Mini Plus II vs. Condor XC-Mini Plus Comparison

 

  • Intelligent Indicator Light

3 effective colors of light can change according different working status. Help to monitor key cutting status all the time.

Red - error warning.

Blue - normal working.

Yellow - info notification.

Xhorse Condor XC-Mini Plus II vs. Condor XC-Mini Plus Comparison

 

  • Key Blank Engraving

Support to customize texts or patterns on key blank, realize to make an unique key.

Xhorse Condor XC-Mini Plus II vs. Condor XC-Mini Plus Comparison

 

  • 8-Core Processor

Driven by 8-Core CPU, make sure faster running speed and prompt response, allow high resolution.

 

  • WiFi Connection

Supports directly upgrade online via WiFi, no need to connect with a PC. Much faster and convenient than before.

Xhorse Condor XC-Mini Plus II vs. Condor XC-Mini Plus Comparison

 

As an upgrade, are these new features satisfying?

Any comments are welcome to contact us.

www.xhorsestore.co.uk

Comments

Post a Comment

Popular posts from this blog

Xhorse VVDI PROG with DB15 cable read Porsche BCM 2M25J

Image
 I finally got the new XDPGSOGL DB15 Cable to realize working with VVDI PROG & Xhorse Porsche Adapter . This is the first time to test reading the Porsche BCM 2M25J and give a review. Since I have already opened the BCM and insert a solder-free adapter on it. Very convenient without any soldering. Only to refer to the connection diagram in VVDI PROG . Be careful with those points marked in red. Test Backup Review Start VVDI PROG software to select options at first: Type: 4 IMMOBILIZER, Brand: Porsche, Chip: BCM-2M25J-BACKUP(ADAPTER) Click "Read", it reads correctly. Then save the D-Flash file. It's always safe to make a backup. Backup D-Flash OK. Now let's read P-Flash… Reading success. It takes longer time to finish. Save the P-Flash file. Backup P-Flash OK. Unlock & Lock BCM Review Select chip to: BCM-2M25J-R/W/UL(ADAPTER) Read ID OK . C482 is the Porsche processor that I have. Read Partition, it says "Chip is crypt. This ...
Read more

Xhorse VVDI Key Tool Plus AKL programming for Audi A4 2013

Image
  Xhorse VVDI Key Tool Plus Pad can program Audi A4 2013 all keys lost by OBD successfully. Xhorse also developed Audi BCM2 Solder-free Adapter for programming 2013-2019 A4L, A5, Q5, A6L, A7, A8 on bench.   It'll need to select "Prog read - encrypted BCM2" instead of "Read by OBDII" on tablet. As I don't have those Audi BCM2 adapters, I'll go on using OBD method. It may help: How Audi BCM2 Solder-Free Adapter Works with Xhorse Key Tool Plus? http://blog.xhorsestore.co.uk/xhorse-adapters-and-parts/how-audi-bcm2-solder-free-adapter-works-with-xhorse-key-tool-plus/   Procedure Connect VVDI Key Tool Plus into OBD2. The steps including read & save BCM data, make dealer key & key learn.   Read & Save BCM Data Immo programming >> Europe >> Audi >> Select by type >> Fifth immobilizer system >> Start programming >> Read BCM data >> Read by OBDII >> Read BCM2 data (OBDII)   Ins...
Read more

Xhorse VVDI Key Tool Max PRO Clone Universal Remote Key

Image
 Hello, I'm here to show how to quickly clone an aftermarket remote with Xhorse VVDI Key Tool Max PRO programmer . This is the new key to be cloned, it's a Wired Remote comes from Xhorse. Preparation As it's a wired remote, you have to open key shell and take out the circuit board. I usually use a lighter to do it. Take out circuit board, don't put any battery on it. Connect the Universal Remote Key board to VVDI Key Tool Max PRO via cable. Now, let's start! Clone Remote Hold the working key. Go to Remote clone >> Special clone >> Start clone Just follow the prompts to operate: Press Lock button. Press again Lock button. Press Unlock button. Press again Unlock button. Press Trunk button. Press again Trunk button. Press Panic button. Press again Panic button. *If verification failed, just try re-acquisition again. *If the button is not required, press "Skip this button". Confirm the frequency: 433.92MHz, 184bps. ...
Read more