XhorseStore

 How to cut a Honda HO01 key blank by using Xhorse Dolphin XP005 + VVDI Key Tool Max ? Here I have an original key, and will use it to show the procedure below.   Key Cutting Install the original key on M2 clamp. Control on VVDI Key Tool Max , Find bitting >> Honda >> HON66 >> M2-A clamp tip align 2 position >> Decode key >> Continue Dolphin XP-005 Machine will start decoding automatically. Just wait... Decode key success.   Remove the working from clamp, fix the HO01 key blank instead. Make sure it’s flat. Press Cut >> Continue   Dolphin XP-005 machine starts cutting key... Cutting key completed.   That’s just one side. Repeat same operations for the other side. It’s easy and smart.   Take out the key to have a try after cutting was done. It’s same as the original one. (Note: the new key needs to debur right after cutting.) Key Programming Put the original working key into VVDI Ke...

  Xhorse Key Reader is supported to identify Suzuki WagonR key, then working with Dolphin XP-005 to cut it directly. Very smart and convenient. Following I’ll show how to do it. I’ll use Xhorse App to control them, or a VVDI Key Tool Max is also workable.   Insert the key into Key Reader Blade Skimmer, go to Vehicle database >> Suzuki >> Swift >> new(After 2019) >> HU87R >> OK >> Optical identification >> Identification >> Identification It’s identifying automatically... Bitting codes came out! Very quickly in a few seconds. It says 3423124312. Fix a new key blank to be cut on clamp in advance. To cut >> Cutting key >> Cut Xhorse Dolphin will start cutting key directly.   Process complete.   Remove the new key to check. It can switch the lock. The bitting is same with the original one. Done! Using Key Reader to work with Xhorse Key Cutting Machine is quite...

 How to use new machine Xhorse Dolphin XP-005L to cut a Hyundai ix35 LM 2009-2011 key? I have a working key at hand, so let’s start to copy:   Connect XP-005L Key Cutting Machine with WiFi, go to Vehicle database >> Hyundai >> ix35 >> LM(2009-2011) >> Original 　　 　　 　　 　　 　　 M5 clamp side A tip. Tip align 3rd align.   Install M5 clamp as prompted. Press the key blank with fingers on clamp, and fix it on.   Put down the protection cover. OK >> Learn Key   Xhorse Dolphin IIwill start decoding... Decode key complete. The bitting codes were display on screen: 21332413   Clean metal debris. Then fix a new key blank to be cut on M5 clamp. Cut key >> Cut 　　 　　 　　 Dolphin II machine starts to cutting... Wait until 100%. Cutting key completed.   Take out the new key to have a try. It does switch the lock. It is same with the original one. Done! 　　 　　 　　 　　 Dol...

 How to solve BMW tool Xhorse VVDI BIMTOOL PRO “Error: 211” when programming? It may prompt: “Error on flash programming! Programming state invalid”.   Solution It’s no cause for concern, follow 2 steps below can easily fix it. Open BMW VVDI BIMTOOL software, locate the path: Synchronize device time >> Parameters setting >> Programming speed. Revise the programming speed to “1”. Then the problem will be okay. Error has gone!   Hope this is helpful. www.xhorsestore.co.uk

 M5 is a new clamp that featured with M1&M2 functions together for Xhorse Dolphin XP-005L machine . It requires 4 steps settings for the first time to work normally. Let’s learn the setting instruction below to start cutting.   It may help: How to Use Xhorse Dolphin XP-005L M5 Clamp? http://blog.xhorsestore.co.uk/key-cutting/how-to-use-xhorse-dolphin-xp-005l-m5-clamp/   Power on Dolphin XP-005L Key Cutting Machine for ready.   Step1. Cutting Setting Go to “System >> Machine Parameter >> Cutting Setting” Here we can set spindle speed, move speed, cutter diameter, LED status and buzzer switch. Press “Save” to finish.   Step2. M1 Clamp Calibration. Insert the probe and the cutter to the top(there’s no need for height adjustment.) Press “M1 Clamp calibration”, install clamp & key according to the tips. Make sure the key stick to the first mark line. Press “Start” when finished.   Dolphin II machine will start...

 How to pair & update Xhorse VVDI MINI Prog EEPROM programmer? No worries, this is exactly what the article is talking about. Check below to learn the procedure step by step.   How to pair VVDI MINI Prog to a smart phone/Key Tool Max? Connect your smart phone/ VVDI Key Tool Max to WiFi. Go to MINI Prog page, press More functions >> Connection mode >> WiFi connection   Press Pair button >> Select MINI Prog device >> Allow location permissions >> Enter WiFi info.   Once connected, Select Pair button again >> Allow Bluetooth connection >> Select device SN.   Done! When synced, we can start to install all available updates.   How to update Xhorse MINI Prog software & firmware? Press “Download” to start download data. MINI Prog database will update automatically... Just wait for 100% Update success.   Go to Update >> Click firmware version in red >> Update >...